SCOM 2007 R2

HP Proliant MP discovery is missing Networks, Storage and Management Processor

Posted by MarcKlaver on April 25, 2013


Recognize the above situation?

When you installed the HP Proliant Management Pack and used the SNMP based agents, some discoveries do not seem to work. To solve this, you must also configure your SNMP settings on your server. In order for the SNMP based agents to read all required information, an SNMP community string must be created.

You should configure two things within the SNMP Service Properties:


Under “Service” allow all.



  • Under “Security” add a read-only community string and make sure that SNMP packets are accepted from the “localhost” host. Note that the :”Send authentication trap” option is not required, but optional.
  • Restart your SNMP Service
  • Restart the SCOM service

And after a few minutes the result should look like this:


When the HP Agents start, it will read the SNMP settings and use it to access the SNMP based information from the agent Smile.


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: